Description
ST-LINK/V2 ST-LINK V2(CN) ST LINK STLINK Emulator Download Manager STM8 STM32 artificial device
Description
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
Key Features
- The 5V power supplied by a USB connector
- USB 2.0 full speed compatible interface
- USB standard A to mini B cable
- SWIM specific features
- 1.65 V to 5.5 V application voltage supported on SWIM interface
- SWIM low-speed and high-speed modes supported
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
- JTAG specific features 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
- Direct firmware update feature supported (DFU)
- Status LED which blinks during communication with the PC
- Operating temperature 0 to 50 °C
Radhakrishnan, V. –
The ST-LINK V2 product is quite good, for the price paid.
The tiny jumper cables provided ( connector cables ) were unfortunatey not of good quality.
I was initially thinking the product was faulty until I changed the wires and found it working fine !
Dipak –
Debugger works like a charm on my Linux system
– No driver is required
– I use Xubuntu 14.04.4
– Eclipse C /C++ IDE Oxygen.2 Release (4.7.2)
– OpenOCD version 0.10.0+dev-00404-g20463c28
I am using it for debugging STM32F103C8T6 (blue pill)