Description
Pro Mini electronic building blocks Interactive Media ATMEGA328P 5V/16M for arduino Compatible Nano
Mini Pro is a microcontroller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs),
Eight analog inputs, a 16MHz resonator, a reset button, mounting hole pin head.
Technical parameters:
- 14 Digital input / output port: RX, TX, D2 – D13
- 8 analog inputs: A0 – A7
- 1 pairs of ports TTL level serial transceiver: RX / TX
- 6 PWM ports: D3, D5, D6, D9, D10, D11
- Using Atmel AtMega328P-AU MCU
- Support serial download
- Support for external 3.3V – 12V DC power supply
- Support 9V battery supply
- Clock frequency: 16MHz
- Size: 33.3 x 18.0 mm
Note:
If uploading sketches using the Arduino IDE and selecting the corresponding Pro Mini board fails, follow these steps to update the bootloader:
- Prepare an Arduino Uno, Mega or similar to act as ISP as described at http://arduino.cc/en/Tutorial/ArduinoISP
- Wire it up as shown in the wiring diagram posted above
- Use Arduino IDE to flash the bootloader of the corresponding Pro/Pro Mini (5V, 16MHz) to SKU099688 or SKU066315 I use six pinheader pins on breadboard and a clamp to ensure good contact between the pins and the holes. This way I do not have to solder pin headers.
Reviews
There are no reviews yet.