Speed Measuring Sensor Counter Motor test module slot type optical coupling for Arduino XD-03

Description

Speed Measuring Sensor Counter Motor test module slot type optical coupling for Arduino XD-03

USES:

Widely used in motor speed detection, pulse count, the position limit, etc. The DO output interface can be directly connected to a micro-controller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect.
DO modules can be connected to the relay, limit switch, and other functions, it can also with the active buzzer module, compose alarm.

Features

• using imported trough type optical coupling sensor, groove width 5 mm.
• the output state light, lamp output level, the output low level light.
• covered, output high level;Without sunscreen, the output low level.
• the comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
• the working voltage of 3.3 V to 5 V
• output form: digital switch output (0 and 1)
• a fixed bolt hole, convenient installation
• small board PCB size: 3.2 cm x 1.4 cm
• use the LM393 wide voltage comparator Module

USES:

• The module without slot, the receiving tube conduction, module DO output low level, shade, the DO output high level;
• the DO output interface can be directly connected to a microcontroller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect.
• DO modules can be connected to the relay, limit switch, and other functions, can also with the active buzzer module, alarm.Product connection details:The positive 3.3-1, VCC power supply 5 v2, GND connect power cathode
• DO TTL switch signal output4, AO the module does not workShipping list:A speed measuring sensor module

Wiring specification:

VCC Connect the positive 3.3 5 v power supply
GND Connect power negative
DO TTL switch signal output
AO This module does not work

The module do not have Analog output.