Description
TEC1-12706 12V DC, 50~92W Semiconductor Thermoelectric Peltier Cooler Heater Module
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump in the US industrial heating elements. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.
- Color: White
- Material: Plastic + ceramics
- Rated voltage: 12V
- Rated power: 50~72W
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
- These devices must be used in conjunction with a heat sink to avoid burned
- One side is cooling (Printed model number)and another side is heating (Printed no word) when working.
- Please radiating the heating side, avoid using under no-radiating condition over 2s\Coated with thermal grease when install the device
- Cable length: 30cm
- Dimensions: 1.57 in x 1.57 in x 0.12 in (4.0 cm x 4.0 cm x 0.3 cm)
Notes:
- Power ON the device only with proper Heat-sink setup to avoid any burning/damage or malfunction of the device!
- Use a good quality heat sink (such as in CPU fans) with thermal paste and power the device.
- Use a 12V Dc Power supply to power the TEC1-12706.
- Use ONE AA battery for 10- 20 seconds to power ON the device to find the hot /cold side.
Warning!
Power ON the device only with proper Heat-sink setup to avoid burning/damage/malfunction of device!
Performance Specifications
1. The hot surface Th of the TEC must be attached to a suitable FAN SINK (60x60x40+mm) that is capable of carrying away both the heat pumped by the TEC plus Joule heat from the electric power supplied to the TEC. A heat sink rise of 15C above ambient is typical for many TEC applications. Otherwise, a bigger heat sink must be used to reduce temperature.
2. Care should be taken when applying pressure during installation. Uniform pressure is desired across the mounting surfaces. If uneven pressure is applied, thermal performance may be reduced or damage may occur to the TEC.
3. Clean surface thoroughly, making sure there are no chips, dirt or any foreign substances that may affect bonding. Coat the contacting sides, Th and Tc, with thermally conductive grease or glue.
Tanya –
Although the voltage rating for this product is 12 V, if you supply 5 V (I used a mobile charger), it works and does its job very quickly. Overall, nice product, works as expected. One side gets cold and opposite side gets very hot. Be careful as the hot side gets very hot.
Anurag Gupta –
working very well. The hot side becomes very HOT!! rapidly. So need good heat sinking on that side. When i used the heat sink gel too on the hot side of the heat sink…the cold side also became extremely cold. I put few drops of water on it and it just froze into ice in about 15-30 seconds!!! Working very well.
Tapash m. –
Work in 5volt only(mobile charger) when try in 12volt, it getting hot both side. Useful for mini water cooler.
Tapash m. –
Product is very nice and useful for tech lovers .I used 12 v 10 amp charger for it,and it is working well
Balajee s –
Very good performance and cool I’m so happy😄
sumer –
I used just for fun not for any serious project, and it worked as expected
Asfak munshi –
Nice great product i m replace this product one time good response
akash –
helpful working power full but not longer onli work 15.minits and ded
Sd b. –
Product with very good packing and results are outstanding. Temprature reached upto 4°c with insulation.
Shekhar Tandon –
Excellent working but slightly on higher price
ANSHUMAN SHARMA –
Very good product for innovation purpose
Samiran Sharmah –
Its work properly ,i use this in my project ,you can buy it
SAM –
Peltier working good. Very nice for project work
RK Mehdiratta –
The product is very well but it is a little heavy .the power output was good as mentioned.
Utsav –
Very good product output cooling temperature is 5degree Celsius.
Very good product.
Jagdish Meghwanshi –
Nice Product provide.
Good working…..thanks.