Description
Mini 0.36 Digital Voltmeter dc 4.7-32V 2 wires Vehicles Motor Voltage Panel Meter led Display Color : Red
Product Features:
- The voltmeter use 0.36 inch digital tube display, with super small volume, area with only a coin similar
- Connection is simple, just need to pick up two lines, a joint reverse protection, then do not burn
- Starting voltage is low, only 3.50 V, can correct measurement
- To achieve the best measurement precision, the voltmeter will measure the voltage according to the different automatic moving the position of the decimal point
- Can be used for measuring the car / battery car / motorcycle battery voltage, and other forms of voltage
- Can be used in all kinds of voltage measurement purposes
Technical Parameters:
- Weight : 4g
- Display color: Red
- Display mode: Three 0.28 LED digital tube
- update rate: About 500 ms/time
- Physical size: 30 x 12 x 8.5 mm (L*W* H, including installation ear)
- Power supply: Don’t need the power supply, direct use of the test voltage as a power supply
- Lead wire length: 10 cm
- The minimum input: 4.70V
- The maximum input: 32V
- Measurement range: DC4.7 – 32V
- Operation temperature: -10 degrees~65 degrees
- Measurement accuracy: ± (1% + 2 Digit)
- Mounting holes distance: 26mm
Wiring:
- Red: Power Supply +,Measure Voltage +,(4.7 ~ 32V DC)
- Black: Power Supply -, Measure Voltage
rick Chakraborty –
Good product everything is OK, the 7 segment display works fine but it could have a casing for it’s circuit, I had to build my own….
Laxmikant bhandare –
Because of this voltage meter I have a good voltage meter that I knew that my CD dulux bike’s battery voltage passed me. Also, I used to know how much battery was spent when I started the light, horn, side indicator of my bike. Now I do not need a multi-meter monitor to check the voltage of the battery. Now when I turn on the bike, the battery voltage is easily visible in this voltage meter. It’s very easy to set up this voltage meter bike. I give this voltage meter to 5star.
Rajeev.R.S. –
Its a product you can use to check your batteries (both household inverter and vehicle). the problem is that its not showing exact readings as on my multimeter 1 point +/- …I am using a cheap multimeter, you guys have to check it yourself to confirm…its working fine though. I am not using it continously..so not able to say about the life..I am though happy with the purchase..
Mahesh K R –
Essential component for all cars and bikes.we could know the exact working of electrical charging system.when the voltage above 14.5 we may assume that alternator regulator problem and could avoid battery explosion.as no new vehicle have volt metre and ampere metre.this product is accurate.in my car and bike it shows voltage and functioning of regulator can easily identifiable.
Anil –
I installed this volt meter inside my 45w mini inverter.
-small and compact.
-working good, accurate.
harsh bhatt –
I installed it on my dad’s hero pleasure
And it works perfectly but only one problem is that it’s brightness is not very much it isn’t very visible in bright sun light
Sunil –
it is good working. i installed on to ups battery
now i have been ordered two more For inverter battery, because i wants it put on to inverter batteries for “level of battery”
Thanks Amazon
Pranav_G –
High quality device. Bought 5 and they all arrived calibrated within 0.1V of each other. There’s a small adjustment on the back for adjustment. Mine are red; they are not overly bright. I have mounted them behind a red Plexiglas sheet to improve contrast. The SMD devices are on the rear of the board, the mounting lugs will require a pair of stand-offs if you want to mount this on the back side using them (eyeball measurement approx 1/8″). Read-out changes about once every half second. I’ve got them measuring the output of an old linear power supply and they seem to be happy with that (low ripple).