• Model: STM32F103C8T6.
• Core: ARM 32 Cortex-M3 CPU.
• 72MHz work frequency.
• 64K flash memory, 20K SRAM.
• 2.0-3.6V power, I/O.
• Reset(POR/PDR).
• 4-16MHz crystal.
• On-board Mini USB interface, you can give the board power supply and USB communication.
• Size:5.3cm x 2.2cm.

The post STM32F103C8T6 ARM STM32 Minimum System Development Board Module For arduino appeared first on Absolute Native Electronics.

11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
1 analog input(3.3V max input)
a Micro USB connection

Package Included:
1×WeMos D1 mini
2×Long female pins
2×Short female pins
2×Normal pins

The post D1 mini – Mini NodeMcu 4M bytes Lua WIFI Internet of Things development board based ESP8266 by WeMos appeared first on Absolute Native Electronics.

Introduction:

The NodeMcu is an open-source firmware and development kit that helps you to
Prototype your IOT product within a few Lua script lines.
For more details, please visit https://github.com/nodemcu/nodemcu-firmware/wiki/nodemcu_api_en

Features:

• Open-source
• Interactive
• Programmable
• Low cost
• Simple
• Smart
• WI-FI enabled
• Ard–uino-like hardware IO
• Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
• Code like ard–uino, but interactively in Lua script.
• Event-driven API for network applicaitons, which faciliates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
• Greatly speed up your IOT application developing process.

Specification:

• The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
• Power your developement in the fastest way combinating with NodeMCU Firmware!
• USB-TTL included, plug&play
• 10 GPIO, every GPIO can be PWM, I2C, 1-wire
• FCC CERTIFIED WI-FI module(Coming soon)
• PCB antenna

The post V3 Wireless module NodeMcu 4M bytes Lua WIFI Internet of Things development board based ESP8266 esp-12e for arduino Compatible appeared first on Absolute Native Electronics.

The post D1 WiFi uno based ESP8266 shield ESP-12E WeMos for arduino Compatible appeared first on Absolute Native Electronics.

Description:

• Used for the XBee module configuration parameters
• Easily connected to a PC via mini USB cable
• XBee-setting support software X-CTU
• Also used as a USB-TTL adapter
• Voltage: +5V(USB Power)

Usage:

1. PC via a USB cable to connect directly with the XBee adapters,
2. Bluetooth Bee configure or use as data transmission,
3. ARDUINO PRO MINI Downloader

The post XBee Explorer Xbee USB Mini Adapter Module Board Base Shield Multifunction appeared first on Absolute Native Electronics.

Description
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

Key Features

• The 5V power supplied by a USB connector
• USB 2.0 full speed compatible interface
• USB standard A to mini B cable
• SWIM specific features
• 1.65 V to 5.5 V application voltage supported on SWIM interface
• SWIM low-speed and high-speed modes supported
• SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
• JTAG specific features 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
• Direct firmware update feature supported (DFU)
• Status LED which blinks during communication with the PC
• Operating temperature 0 to 50 °C

The post ST-LINK/V2 ST-LINK V2(CN) ST LINK STLINK Emulator Download Manager STM8 STM32 artificial device appeared first on Absolute Native Electronics.

Product introduction:

• 32 bit CONTEX ARM CPU, 72MHz core
• System integration of USB2.0 data transmission interface, ensure speed burning
• Support chip wide: including the most commonly used 25 SPI FLASH, 24 EEPROM, 26EEPROM,
• Improve the function of the host computer programming software, all Chinese humanized operation interface
• Support chip wipe, write, check the automatic Support chip wide: including the most commonly used 25 SPI FLASH, 24 EEPROM, 26EEPROM,
• Improve the function of the host computer programming software, all Chinese humanized operation interface
• Support chip wipe, write, check the automatic burning
• Removal of the protective function of the encryption chip
• Automatic identification of burning chip
• (exclusive: 25 FLASH automatic identification model, 24EEPROM automatically identify type)
• (big 25 SPI FALSH database, other chip could determine the chip type 24EEPROM, the powerful automatic recognition )
• Burning voltage automatic switching, support 3.3V 5V chip programming voltage
• Press the operation button automatically detect whether the chip card.
• Hardware and firmware. Perfect agreement, device algorithm is realized by software, it is convenient to upgrade.
• Support Windows 2000, XP, Vista, Win7 operating system

Field of application:

• home appliance repair appliance repair industry: suitable for brush to write memory chip color TV, DVD, computer motherboards, hard disk.
• product development: test chip programmer company product development process.

The post XTW100 Programmer USB Motherboard Multifunctional BIOS SPI FLASH 2425 Read / Write Burner appeared first on Absolute Native Electronics.

Mini Pro is a microcontroller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs),

Eight analog inputs, a 16MHz resonator, a reset button, mounting hole pin head.

Technical parameters:

1. 14 Digital input / output port: RX, TX, D2 – D13
2. 8 analog inputs: A0 – A7
3. 1 pairs of ports TTL level serial transceiver: RX / TX
4. 6 PWM ports: D3, D5, D6, D9, D10, D11
5. Using Atmel AtMega328P-AU MCU
6. Support serial download
7. Support for external 3.3V – 12V DC power supply
8. Support 9V battery supply
9. Clock frequency: 16MHz
10. Size: 33.3 x 18.0 mm

Note:

If uploading sketches using the Arduino IDE and selecting the corresponding Pro Mini board fails, follow these steps to update the bootloader:

• Prepare an Arduino Uno, Mega or similar to act as ISP as described at http://arduino.cc/en/Tutorial/ArduinoISP
• Wire it up as shown in the wiring diagram posted above
• Use Arduino IDE to flash the bootloader of the corresponding Pro/Pro Mini (5V, 16MHz) to SKU099688 or SKU066315 I use six pinheader pins on breadboard and a clamp to ensure good contact between the pins and the holes. This way I do not have to solder pin headers.

The post Pro Mini electronic building blocks Interactive Media ATMEGA328P 5V/16M for arduino Compatible Nano appeared first on Absolute Native Electronics.

• internal motherboard, U disk shell using aluminum alloy installation, convenient to carry, safe and reliable!
• interface definition on the shell directly tagging, be clear at a glance, convenient and practical!
• 5 V, 3.3 V available at the same time, convenient for you to link the 5 V and 3.3 V target board
• shell characters using laser laser, laser engraving, never fade off! Permanent clear!
• internal motherboard with 500 ma self recovery fuse, completely protect your expensive computer motherboard!
• The LED indicator light, convenient you always observes the working state of the ST cc-link V2!
• Distribution 4 with dupont line, let you can easily cope with different target plate line order!
• Use anti-static bag packaging, automatic sealing machine sealed packaging, safe and reliable, does not fear the electrostatic, not afraid of water!

Functions and features:

1. support the whole series of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address! Don’t need to read instructions!
2. support all series STM8 SWIM download debugging (common development environment such as IAR, STVD etc.) are supported.
3. support firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2. The J17. S4.
4. + 5 v power supply output, output it can protect the I/O port, not afraid of error cause damage of ST – LINK V2!
5. easy interface to use pure copper plating 2.54 spacing horn, with 20 cm dupont line, can deal with different target board line sequence, flexible connection;
6. use U disk aluminum alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling.

Support the software version is as follows:

1. ST cc-link Utility 2.0 and above
2. the STVD 2 and above
3. STVP 3.2.3 and above
4. IAR EWARM V6.20 and above
5. IAR EWSTM8 V1.30
6. KEIL RVMDK V4.21 and above

The post ST-Link V2 automatic upgrade Perfect support for STM8 STM32 Downloader / Programmer / Simulator appeared first on Absolute Native Electronics.

UNO R3 MEGA328P ATMEGA16U2 for Arduino + Free USB Cable, simulate USB HID

Features

1. Increase the needle interface, so that it can be applied to the connection module when using ordinary dupont line!

Arduino profile
What is the Arduino
Arduino is a Simple I/o platform based on open source code, and have used similar to Java, C language Processing/Wiring development environment, the characteristics of easy to understand. Allows you to quickly use the Arduino do interesting things. Arduino can be used with some electronic components such as: LED lights, buzzer, buttons, photosensitive resistance, and so on. The Arduino development environment based on the principle of open source interface, allows you to free download to use to develop more amazing interactive work.

Characteristics described
Open circuit diagram of the original design, the development of software
interface for free download, can also be in accordance with the requirements and their modified, download the program is simple and convenient.

Can simply use sensors, all kinds of electronic components connection (such as: LED lights, buzzer, buttons, photo
sensitive resistance, etc.), make all sorts of interesting work.

Using high-speed microprocessor controller (ATMEGA328), development and environment are all very simple interface, easy to understand, very suitable for beginners to learn.

Performance description
Digital I/O Digital input/output terminal, a total of 0 ~ 13.
Analog I/O Analog input/output terminal, a total of 0 ~ 5.
Support the ISP download function.
The input voltage: when connected to the computer USB without external power supply, external power supply 5 v ~ 9 v dc voltage input.
Output voltage: 5 V dc voltage output and 3.3 V dc voltage output.
Using Atmel Atmega328 microprocessor controller.

The post UNO R3 MEGA328P ATMEGA16U2 for Arduino + Free USB Cable, simulate USB HID appeared first on Absolute Native Electronics.