Description
USB 2.0 to RS485 Serial Converter Adapter CH340G+MAX485 CNT-005
Features:
- USB to RS485 Converter Adapter
- USB connector: to your PC
- RS485 connector: to your RS485 device
- No need external power, powered by USB port
- Fully compliant USB 2.0 standard , backward compatible with USB1.1
- All kinds with RS485 port device parameter settings , data communication
- Short distance , such as parameter settings of the computer peripheral equipment , the use of common data lines can be .
- A and A port of the device when the wiring is connected , B and device B connected . Some devices D + A and D, – B .
Applications:
- LED display of communication data
- Machine PLC data reading and writing
- Monitoring data read and write , and PTZ control
- Centralized control of household electrical appliances
- Access Control System ; card
- A variety of industrial automation ; instrumentation
- Parking ; bus fees
- Dining Hall ; staff attendance
- Highway toll station; ATM machine
Specification:
- Dimension:6.0 x1.8×1.4cm
- Color: Black
- Net weight: 8g
- Packaging weight: 18g
- Support System: Windows XP , Vista, Windows 7 , Linux , MacOS , and WinCE5.0 drive
- Supports baud rate range : 75bps – 115200bps , up to 6Mbps
- Supports Plug , Play and hot-swap ( USB side) ;
- Better than using CH341D chip or similar chip to support the laptop USB port .
- Communication distance up to 1.2KM, with anti-jamming performance of industrial site ;
- Work temperature range: -40
- Communication distance :1200m(max)
Download driver : CH341SER_4
sunil shah –
I just got the USB 2.0 to RS485 Serial Converter Adapter CNT-005…where do I get Windows 7 driver for the same?
Thanks,
Sunil
Chandrakant –
Did you get the driver for this device?
And can you please review its performance. Is it working fine? I am looking for a good usb-rs485 converter.
admin –
Yes It works fine.
The driver is supplied with the device.
T –
https://arduino-info.wikispaces.com/Nano-USB-Drivers
manoj aggarwal –
good product
nishant –
I had doubt before i purchased this product considering its price compared to other converters in market but it is really good. It is working perfectly fine. I tried this with 2-3 different instruments and communication is well established. Just seller should also provide driver CD with product.
priyesh chapanera –
Conver is working well, no any issue with it,
Only you need to ask for driver at mention contact number on box.
amit gupta –
It is working good, but use this on reguster modscan32 software
Prada Mopher –
Although the Modbus terminal was a bit twisted to the left side I was fearing this would not work. but data transfer happened and it worked perfectly fine. Recommended buy.
Ramesh –
Its working good but build quality can be much better.
Kaustubh Bhave –
Product is very useful and working very well.
sheikh haydar –
Nice and well working