Super\u00a0MINI\u00a0ELM 327 Bluetooth V2.1 Latest Version<\/span><\/strong><\/span><\/p>\n Highlights:<\/strong> Features:<\/strong> Remove spaces from ECU responses (to speed data transmission) Display current sensor data, including: 1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). Multi-Protocol Support:<\/strong> Vehicle Coverage:<\/strong> \u00a0<\/span><\/p>\n Alfa Romeo\/ Ad\/ Bentley\/ BW\/ Cadillac\/ Chevrolet\/ Chrysl\/ Citroen\/ Daewoo\/ Fiat\/ Ford\/ GM\/ Hod\/ Hyundai\/ Isuzu\/ Jaguar\/ Jeep\/ Kia\/ Land Rover\/ Lexus\/ Mazda\/ Mercury\/ Mini\/ Nissan\/ Mitsubishi\/ Opel\/ Peugeot\/ Posch\/ Renault\/ Rover\/ Saab\/ Seat\/ Skoda\/ Toyt\/ Vauxhall\/ Volvo\/ VW<\/span> Confused whether your car is OBD1 or OBD 2 then Refer Below link India:<\/b> This hardware can match much other software still! But most of them are not free! Highly Recommended for hatchback cars and cars with OBD Port placed above pedals which can obstruct leg movement while driving! Please verify that your vehicle is OBD-II compliant by\u00a0looking under the hood for a sticker indicating compliance.<\/strong><\/p>\n <\/p>\n STEPS TO CONNECT:<\/b><\/span><\/span><\/p>\n -Start Car <\/span><\/p>\n Super\u00a0MINI\u00a0ELM 327 Bluetooth V2.1 Latest Version Highlights: The newly developed wireless scan tool. It supports all OBD-II protocols. It is the latest version 2.1 Bluetooth connection, no Batteries, Cables, or Switches. Wireless (Bluetooth) 5~ 10 meters Retrieve Fault Codes (DTCs) and clear Check Engine lights. Can also be used with a PC with a Bluetooth […]<\/p>\n","protected":false},"featured_media":3871,"comment_status":"open","ping_status":"closed","template":"","meta":{"spay_email":""},"product_cat":[36,168],"product_tag":[326,830,829],"yoast_head":"\n
\nThe newly developed wireless scan tool.
\nIt supports all OBD-II protocols.
\nIt is the latest version 2.1
\nBluetooth connection, no Batteries, Cables, or Switches.
\nWireless (Bluetooth) 5~ 10 meters
\nRetrieve Fault Codes (DTCs) and clear Check Engine lights.
\nCan also be used with a PC with a Bluetooth Card.<\/span><\/p>\n
\nRead diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
\nClear trouble codes and turn off the MIL (“Check Engine” light)
\nSet the maximum number of responses to obtain<\/span><\/span><\/p>\n
\nStore a unique identifier in EEPROM
\nSet the CAN mask and filter with one command
\nEasily switch between variable and fixed CAN message lengths
\nSend CAN remote frames (RTRs)<\/p>\n
\n<\/strong>
\n\u00a0\u00a0\u00a0\u00a0\u00a0 Engine RPM
\nCalculated Load Value
\nCoolant Temperature
\nFuel System Status
\nVehicle Speed
\nShort Term Fuel Trim
\nLong Term Fuel Trim
\nIntake Manifold Pressure
\nTiming Advance
\nIntake Air Temperature
\nAir Flow Rate
\nAbsolute Throttle Position
\nOxygen sensor voltages\/associated short term fuel trims
\nFuel System status
\nFuel Pressure
\nMany others…<\/span><\/p>\n
\n2.Clear trouble codes and turn off the MIL (“Check Engine” light)
\n3.Display current sensor data, including:
\n4.Engine RPM
\n5.Calculated Load Value
\n6.Coolant Temperature
\n7.Fuel System Status
\n8.Vehicle Speed
\n9.Short Term Fuel Trim
\n10.Long Term Fuel Trim
\n11.Intake Manifold Pressure
\n12.Timing Advance
\n13.Intake Air Temperature
\n14.Air Flow Rate
\n15.Absolute Throttle Position
\n16.Oxygen sensor voltages\/associated short term fuel trims
\n17.Fuel System status
\n18.Fuel Pressure
\n19.Many others…
\nFor your information:
\nFor your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.<\/p>\n
\n1. SAE J1850 PWM (41.6Kbaud)
\n2. SAE J1850 VPW (10.4Kbaud)
\n3. ISO9141-2(5 baud init, 10.4Kbaud)
\n4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
\n5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
\n6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
\n7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
\n8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
\n9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
\nA.SAE J1939 CAN (29bit ID, 250*Kbaud)
\nB.USER1 CAN (11*bit ID, 125*Kbaud)
\nC.USER2 CAN (11*bit ID, 50*kbaud)
\n*default settings (user adjustable)<\/p>\n
\nWorks on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003\/2004 in Europe)<\/p>\n
\nFor your information:<\/strong>
\nFor your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.<\/span><\/p>\n
\nhttp:\/\/www.totalcardiagnostics.com\/support\/Knowledgebase\/Article\/View\/3\/0\/is-my-car-obd-2-compatible-and-supported-by-obd-software#india<\/span><\/p>\n
\nIf your car (any brand) is made\/imported AFTER 1 Jan, 2010 \u2014 then it’s 100% OBD-2 compliant. It will work.
\nIf your car is made\/imported BEFORE 1 Jan, 2010 \u2014 then it’s OBD-1.<\/p>\n
\nSoftware Included:<\/strong>
\nScantool_net113win (Full Version)
\nEasyOBDII V2.2 (Free Version)
\nOBD2Spy (Demo Version)
\nScan Master-ELM (Demo Version)
\nwOBDCRAZY\u00a0 (Demo Version)<\/span><\/p>\n
\nWorks for Windows98\/ME\/2000\/XP\/Vista & 7!
\nBluetooth pair code: 1234
\nMain Control Chip: PIC18F2480<\/p>\n
\nSize is Only 3cms tall, i.e more than 70% smaller than other ELM327 readers!!
\nSuperMini supports more protocols and has very stable performance compared to other ELM327 Bluetooth Readers! Its most selling and zero customer issues!<\/i><\/span><\/b><\/span>
\n<\/span><\/p>\n
\n-Keep car off or in ignition ON
\n-Plug in Reader into OBD Port
\n-Turn on bluetooth of phone, keep it in discoverable, search for new Device, Select “OBDII” and pair with 1234 pin only
\n-Pair Done!<\/span><\/span><\/p>\n
\n-Start App (Torque\/fun2drive\/etc)
\n-Select “OBDII” as your OBD device in options\/preferences
\n-Wait till app detects protocol and connects to ECU
\n-Good to go! \ud83d\ude42<\/p>\n
\nMini ELM327 Available cars:<\/b>
\nWorks on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003\/2004 in Europe)<\/span><\/p>\nDownload Manual<\/a><\/h1>\n
ELM327 BT OBD II<\/a><\/h1>\n