HC-SR501 PIR Motion Sensor (Detector) Module<\/span><\/h2>\n

<\/div>\n

– Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.<\/div>\n

<\/div>\n

Product Description:\u00a0 PIR infrared sensor module is based on infrared technology, automatic control products.\u00a0High sensitivity, high reliability, low power consumption, low voltage operation mode.\u00a0Widely used in various auto-sensing electrical equipment, especially for battery-powered automatic control products.<\/p>\n

\u00a0Electrical parameters<\/h2>\n

Dimension: 3.2cm x 2.4cm x 1.8cm (approx)<\/p>\n<\/div>\n

Infrared sensor with control circuit board
\nThe sensitivity and holding time can be adjusted
\nWorking Voltage Range: DC 4.5V- 20V
\nCurrent drain:<60uA
\nVoltage Output: High\/Low level signal:3.3V TTL output
\nDetection distance: 3–7M(can be adjusted)
\nDelay time: 5-200S(can be adjusted, default 5s +-3%)
\nBlockade time: 2.5 S (default)
\nTrigger: L: Non-repeatable trigger\u00a0 H: Repeat Trigger (default)
\nWork temperature:-20-+80\u00b0C
\nTrigger Method: L unrepeatable trigger \/ H repeatable trigger
\n<\/div>\n

Features\u00a0:<\/span>\u00a0<\/span><\/strong><\/h2>\n

\n
1. Automatic induction\u00a0:\u00a0to enter the sensing range of the output is high,\u00a0people leave the sensing range is automatically delay off high, output low.<\/li>\n
2. Photosensitive control (optional, not factory setting) can be set photosensitive control, day or light intensity without induction\u00a0.<\/li>\n
3. Temperature compensation\u00a0(\u00a0optional, not factory setting\u00a0)\u00a0: In the summer, when the ambient temperature rises to\u00a030\u00a0~\u00a032\u00a0, detection distance is slightly shorter, temperature compensation can be used for certain performance compensation.<\/li>\n
4. Two kinds of trigger modes: (jumper selectable)\n
   \n
   • Unrepeatable trigger\u00a0:\u00a0<\/strong>the sensor output high, the delay time is over, the output automatically from high into low;<\/li>\n
   • Repeatable trigger:<\/strong> the sensor output high, the delay period, if there is human in its sensing rangeActivities, the output will remain high until after the delay will leave high to low (sensor module inspection Measured the body`s every activity will be automatically extended a delay time period, and the final event of the time delay The starting point of time\u00a0)\u00a0.<\/li>\n<\/ul>\n<\/li>\n
   • With induction blocking time\u00a0(\u00a0default setting\u00a0: 2.5S\u00a0block time\u00a0)\u00a0: sensor module output every time after induction (high variable To the low level), you can set up a blockade followed by time period, during this time period does not accept any inductive sensor signals.This function can be achieved\u00a0”\u00a0sensor output time\u00a0”\u00a0and\u00a0”\u00a0blocking time\u00a0“interval between the work can be applied to interval detection Products; while this feature can effectively inhibit the load switching process for a variety of interference.\u00a0(\u00a0This time can be set to zero seconds-\u00a0tens of seconds\u00a0)\u00a0.<\/li>\n
   • Wide operating voltage range: default voltage\u00a0DC\u00a03.6V ~ 20V\u00a0.<\/li>\n
   • Micropower\u00a0:\u00a0<\/strong>quiescent current\u00a0<50\u00a0microamps, especially for battery-powered automatic control products.<\/li>\n
   • High output signal: the circuit can be easily implemented with various docking.<\/li>\n<\/ol>\n

     Note:\u00a0adjust the distance potentiometer clockwise, sensing distance increases (about\u00a07\u00a0meters), on the contrary, sensing distance decreases (about\u00a03\u00a0meters). <\/b><\/b><\/b><\/b><\/b><\/b>Delay adjustment potentiometer clockwise induction delay longer (approximately300S\u00a0), on the contrary, the induction delay cut short (about\u00a05S\u00a0).\u00a0<\/b><\/b><\/b><\/b><\/b><\/b><\/span><\/p>\n

     Instructions for use\u00a0:<\/h3>\n

     \n
     1. sensor module powered a minute or so after the initialization time, during which interval the output module0-3\u00a0times, one minute after entering standby.<\/li>\n
     2. should try to avoid direct lighting and other interference sources close to the lens surface of the module, in order to avoid introducing interference signal malfunction; avoid the use of environmental flow of the wind, the wind sensor will also cause interference.<\/li>\n<\/ol>\n

        <\/p>\n

        \n
        1. sensor module with dual element probes, probe window is rectangular, dual (\u00a0Amillion\u00a0B\u00a0Yuan) located at both ends of the longer direction, when the body from left to right or right to left walked\u00a0,\u00a0dual infrared spectroscopy arrive time, distance difference, the greater the difference, the more sensitive the sensor, when the body from top to bottom or front to probe or direction from the bottom to walk, the dual IR undetectable changes in the distance, no difference value, so the sensor insensitive or does not work; sensor should be mounted so that the direction of the probe with dual direction of human activity up to parallel as possible to ensure that the human body has been passed by the dual sensor probe.\u00a0To increase the sensing range of angles, the module uses circular lens, but also makes sense probe all sides, but still higher than the top and bottom right and left direction sensing range, sensitivity, strong, installation still possible according to the above requirements.<\/li>\n<\/ol>\n
           \n

           \n

           <\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

           HC-SR 501 PIR infrared sensor module is based on infrared technology, automatic control products.\u00a0High sensitivity, high reliability, low power consumption, low voltage operation mode.\u00a0Widely used in various auto-sensing electrical equipment, especially for battery-powered automatic control products. HC-SR501 PIR Motion Sensor (Detector) Module – Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. Product Description:\u00a0 PIR […]<\/p>\n","protected":false},"featured_media":3776,"comment_status":"open","ping_status":"closed","template":"","meta":{"spay_email":""},"product_cat":[22],"product_tag":[786,482,483],"yoast_head":"\n