The post WEB-U2 USB Tester QC4.0+ PD3.0 2.0 PPS Quick Charging Protocol Capacity DC meter 4~24V 5A appeared first on Absolute Native Electronics.
]]>WEB-U2, upgrade to 4 buttons(PD Switch, Next button, Back button, Mode button) Features:
- Uses high-definition 1.77″ HD color digital screen.
- 5-digit and 6-bit one button switching, support for external HID power supply.
- Surppots online ugrade and adopts QC4+ PD3.0 2 PPS quick charging protocol.
- WEB-U2 USB input port adopts patented high current 5P USB-A type male input can withstand more than 5A high current input.
- When using high current and high power operation, you can use TYPE-C female to output.
- Notice: The MicroUSB female input port also does not support high current and high power, and its input current cannot exceed 2.5A.
Specification:
- Input voltage: DC 4~24V
- Input current: ±5A
- Voltage resolution: 0.00001V
- Current resolution: 0.00001A
- Capacity record: 0~99999Ah 0~99999Wh
- Internal NTC temperature sensor: -20°C~+120°C
- External NTC temperature sensor: -20°C~+120°C
- Storage media: Ferroelectric FARM memory 10 billion brush life
- Firmware upgrade method: HID drive-free upgrade
- Computer connection mode: HID host computer
- Material: Metal & plastic
- Package size: 91x64x19mm/3.58×2.52×0.75inch
- Color: Black
- Quantity: 1 Pc
Note:
- 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
- 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes: 1 x U2 USB Color Display Tester ——————— Other Feature Functions: 1. For Apple PD Charger SN Serial Number Detection 2. 5-digit and 6-bit one-button switching, support for external HID power supply 3. Automatic detection of multiple quick charge protocols 4. Charging treasure gadget,Automatic calculation of efficiency 5. Chinese/English/Traditional Chinese Three Language Menu 6. For OPPO virtual fast charge data line function,VOOC DASH can support fast charge and detect voltage and current without original data cable 7. You can also judge whether it is a standard OPPO or an accelerated charging charger without using a data cable. 8. 5P high current patented custom USB-A plug,Line-free plug-in to help determine whether the standard OPPO, a charger 9. For MACBOOK real machine protocol capture 10. PD-E cable detection 11. PD3.0 PPS QC4+ detection trigger 12. PD sniffing monitoring, packet capture mode 13. Support Huawei FCP SCP broadcast dynamic adjustment,For HUAWEI magic SCP charger nameplate is 8A, broadcast 9A, measured 8.XA protection 14. MFI Cable high voltage protection and quiescent current detection, Need QC3.0 power supply 15. Apple device charging acceleration 16. 1.2V low voltage nickel hydrogen battery detection, HID Power supply, Low voltage measuring , USB HID external independent power supply can be started at 0V and can measure low voltage equipment. 17. U2 is connected to the power supply and constant current load. The current is adjusted to about 1A. Press OK to record the reference value.The cable to be tested is transmitted between the power supply and U2, and the internal resistance of the wire can be tested by the voltage drop. 19. Real-time curve, you can press the pause screenshot / short press to resume immediately, Offline curve can record external device or battery status and temperature, Curves can be exported and saved by the upper machine software
Specifications:
| Type: | WEB-U2 Current Voltage Meter | Voltage: | DC 4~24V |
| Master chip: | STM32F072 ARM Kernel | Current: | 0-5A |
| Display: | 1.77inch TFT screen 128 * 160 Resolution |
Voltage Resolution: | 0.0001V |
| Size: | 52.5 * 34.5 * 13mm(Prox.) | Current accuracy: | Range 0.1%±nd |
| USB interface: | USB2.0 5P male USB2.0A female |
Ampere hourcapacity: | 99999Ah(6 groups) |
| MicroUSB: | PC Input ,PC USB H ID | Ampere hourresolution: | 0.0001Ah |
| TYPE-C: | 2PC IN and OUT | Ampere-hour capacity: | 99999Wh(6 groups) |
| Button: | OK and M key | Watt time resolution: | 0.0001Wh |
| Temperature Sensor: | one temperature sensor inside the tester, it can be connect to a external temperature sensor(optional) |
Power on time: | 100 hours |
| Temperature Measurement: |
-40 C~180 C | Charging time: | 100 hours |
| D+D-Voltage: | Support measurement | Built-in load: | built-in current to small load MTK |
| Fast charge protocol: | Support detection trigger | Bluetooth module: | Bluetooth 4.0 wireless module (Optional) |
| FD trigger: | PD2.0 PD3.0 PPS QC4+E-Marker | Firmware upgrade: | USB HI D free drive |
| Memory: | FRAM ferroelectric (10 billion brush write life) |
PC host computer: | USB HI D free drive |
| Static power consumption: |
Turn off the screen, close the data port < 10mA |
Force sensor: | Built-in 3-axis gravity sensor |
| Internal resistance: | connected to the USB interface 35m ohm(Prox.) |
||
| Serial number: | Built-in independent SN body identification serial number |
The post WEB-U2 USB Tester QC4.0+ PD3.0 2.0 PPS Quick Charging Protocol Capacity DC meter 4~24V 5A appeared first on Absolute Native Electronics.
]]>