Notice:

1.The right ahead of induction side should’t place any metal to block

2.The front/back side should reserve more than 1cm space

3.Module and installation carrier

Features

• Equipped with RCWL-9196 chip supporting 4-28V wide voltage input, high level signal output when detecting the motion with active repeat trigger
• 360 degree no blind angle detection with 5-7m deteciting distance, the detection not affected by the surroundings, better performance than the IR sensor
• Support night detecting function turn on /off, adjustable repeat trigger time and detecting distance by add the SMD components to the corresponding pins
• Working Voltage: DC 4-28V, Board Size: 35.9 X 17.3mm/1.41 X 0.68inch

Specifications

• Operating Voltage: 4-28V
• Operating Current: 2.8mA (typical); 3mA (max)
• Detection Distance: 5-9m
• Transmitting Power: 20mW (typical); 30mW (max)
• Output Voltage: 3.2-3.4V
• Output Voltage Driving Capacity: 100mA
• Trigger Way: repeat trigger
• Output Control Low Level: 0V
• Output Control High Level: 3.3V
• Operating Temperature: -20~80 celsius
• Storage Temperature: -40~100 celsius

Adjustment Part Introduction:

Pin Definition:

• 3V3:3V3 power output
• GND:ground
• OUT:control output;when detect moving objects,it will output high level
• VIN:input voltage,4-28V
• CDS:enable control chip,lower than 0.7V,OUT will output low level all the time

The post RCWL-0516 microwave radar sensor module Human body induction switch module Intelligent sensor appeared first on Absolute Native Electronics.