This is a breakout board for MMA7361 three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices.

Features:

• 100% Brand New
• Size: 20(mm) x 15(mm)
• On-board MMA7361(replace MMA7260),low cost, micro capacitive acceleration sensor
• Support 5V/3.3V voltage input, on-board RT9161, has much lower pressure drop and much faster load corresponding speed than 1117,very suitable for high noise power environment
• Range is chosen by MCU IO, or resistance
• Common pins have been drawn forth, inserted pins are standard 100mil(2.54mm),convenient for dot matrix board
• Dormancy enable can be controlled by MCU IO
• PCB board is gold-plated both sides

The post MMA7361 (Replace MMA7260) Accelerometer Sensor Module For Arduino TK0448 appeared first on Absolute Native Electronics.

MMA7455 Acceleration Angle Sensor Module with Digital output, Supports SPI IIC | Accelerometer module | Digital Tilt Angle Sensor Acceleration Module

The MMA7455L is a Digital Output (I2C/SPI), low power, low profile capacitive micromachined accelerometer featuring signal conditioning, a low pass filter, temperature compensation, self-test, configurable to detect 0g through interrupt pins (INT1 or INT2), and pulse detect for quick motion detection. 0g offset and sensitivity are factory set and require no external devices. The 0g offset can be customer calibrated using assigned 0g registers and g-Select which allows for command selection for 3 acceleration ranges (2g/4g/8g). The MMA7455L includes a Standby Mode that makes it ideal for handheld battery powered electronics.

Features

• board MMA7455 digital output (I2C/SPI), low power consumption, compact capacitive micromachined acceleration sensor;
• Support 5V/3.3V voltage input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for high-noise power supply environment;
• 3 common pin has been drawn, pin standard 100mil (2.54mm), convenient for lattice panels;
• PCB board Size: 24.9 (mm) x12.7 (mm);
• Digital Output (I2C/SPI)
• 3mm x 5mm x 1mm LGA-14 Package
• Low Current Consumption: 400 μA
• Environmentally Preferred Product
• Low Cost

The post MMA7455 Acceleration Angle Sensor Module with Digital output, Supports SPI IIC | Accelerometer module | Digital Tilt Angle Sensor Acceleration Module appeared first on Absolute Native Electronics.